Aspire Spryte AIO Kit

Aspire Spryte AIO Kit

STARTER KITS
0 Order(s)
C$39.99   Min Order Limit: 1
Total Price : C$39.99

The Aspire Spryte, Entirely new designed pod system. It is comfortable to carry as it fits in the palm, lightweight, slim, and stylish. The Spryte is simple and easy to use. The Spryte consists of a convenient to fill 3.5 or 2ml pods. The Spryte equipped with Aspire’s popular BVC coils Regular / Conventional 1.8ohm coil and a second 1.2ohm for use with Nicotine Salts.

Dimension

Thickness:                             26 (mm)

Width:                                   26 (mm)

Height:                                  108 (mm)

Battery Capacity:                650 (mAh)

Filling

Refilling the pod is simply easy. Remove the pod, invert the pod and pull the silicone plug from the filling hole. Fill the pod with e-liquid, and replace the silicone plug firmly. Re-insert the pod into the device by pushing down until it clicks into place. Note: when inserting a new coil and filling the pod, always let the device stand for 5 minutes to allow the coil to become saturated. This will help avoid dry hits and damage to the coil.

Coil Installation

The Spryte uses the standard BVC and the nic-salts BVC coils no matter whatever coil you want to install in the device it is very simple and easy. Simply remove the pod and turn it upside down, remove the airflow part and screw in your desired coil. Replace the airflow part with attached coil and reinsert into the pod. Push the pod back into the power until it clicks.

Note: when inserting a new coil and filling the pod, always let the device stand for 5 minutes to allow the coil to become soaked. This will helps to avoid dry hits and damage to the coil.

Airflow

Normally this kind of AIO pod device don’t have adjustable airflow, the Aspire Spryte has an adjustable airflow system for the suitable vaping experience.

Charging

Charging the Aspire Spryte is also very easy. Just plug the micro USB cable in into the USB slot at the base of the device, attach the micro USB cable appropriate power supply to charge. The maximum charge current can reach up to 1000mA. When attached to the USB with the power on the LEDs will flash blue and red three times, when fully charges the LEDs will flash blue and red twenty times then remain off.

Pod

3.5 / 2.0 ml of E-Liquid Capacity

1.8 Ohm Coil for Regular / 1.2 Ohm Coil Nicotine Salt

BVC CE5 Coils

Bottom Fill

Kit Includes

Standard Version
1* Spryte device 

 2* Extra O rings 

 2* coils (1.8Ωregular BVC& 1.2Ωfor Nic Salt) 

1* Silicone seal

1* Micro USB Cable 

1* Warranty Card 

1* User Manual

TPD Version
1* Spryte device 

 2* Extra O rings 

2* coils (1.8Ωregular BVC& 1.2Ωfor Nic Salt) 

1* Micro USB Cable 

1* Warranty Card 

1* User Manual